The Different Microphone Types

What are the different types of microphones mentioned in the video?  How are each of them different from each other?  What are the best uses for each?

Dynamic microphones have a number of identifying characteristics they're robust and durable. They can be relatively inexpensive, they're not sensitive to changes in humidity, they don't need external or internal power to operate, they usually have a resonant peak in the mid-frequency response. It can be weak in high frequency are weak in the high frequency response beyond 10 kilohertz. A ribbon microphones characteristics can have a relatively flat frequency response, they have a better response, they have better high frequency response compared to dynamic mics, they don't need internal or external power to operate, they're somewhat fragile and require care during handling and operation. Ribbon mics work on cymbals, bass, piano, electric and acoustic guitars, and brass instruments. A condenser microphone characteristics, they have extended low and high-frequency response. Good ones are somewhat expensive, they require either internal or external power, large diaphragm models can be relatively bulky, and low cost models can suffer from poor or inconsistent frequency response. 

Comments

Post a Comment

Popular posts from this blog

Dolly vs Zoom

What is the difference between zooming and dollying? What do dollying and trucking add to the shot? While zoom is created through a static camera change in focal length. A dolly is created by moving the actual camera closer or farther. (Usually on a set of tracks) a dolly can be created using a prime lens, that's because the lens doesn't need to do anything. While a zoom shot only adjusts the camera's focal length a dolly zoom moves the entire camera toward a subject.
Read more

The History of Frame Rates Pt. 2

60 hertz = 60 fields per second. It is created in a 60th of a second resulting in a full 30 frames per second. It was chosen over the air broadcasting because flashing the same frame on screen was not an option that was technologically feasible. Engineers were also more concerned about bandwidth, something they were trying to conserve with over the air broadcast. Another reason to conserve bandwidth and avoid flickering each frame would be interlaced. The introduction to color factored in 1948, the FCC (Federal Communication Communion) put a moratorium on new television broadcast licenses as it tried to figure out what to do with the newly available UHF spectrum. TV sets access died off while they tried figuring out what to do.
Read more

Horror Lighting Tutorial

They talk about their setups in this video and the main one that caught my attention was the staircase scene they created. They put up two lights the first and 150 watt then they do a light with the projector attachment inside and they put an M size steel gobo that replicates the look of a four panel window thus giving the audience the idea this is coming from somewhere natural its originating from within the scene. The second light they use is the softbox on top of it so its not barefaced and they stick the egg crate on top of it to provide some directionality in the living room we put their third and fourth case of which in this case mul richarchardson they use as much as the same in the  projector attachment to illuminate a back wall. 
Read more